Though the Non-Technical part in Vizag Steel Exam is very important but you can't ignore Technical part. You have to score around 60 -70% in this section to for selection. As far as Mechanical Engineering is concerned you can prioritize your subjects according to time.
1. Design
It comprises of around 30% of questions.
In SOM mostly questions will be from Beam, stress basics, spring.
In TOM DOF, Gears and flywheel. If you have not studied gyroscope, balancing, governor than don't study at last moments, leave them.
In MD failure equations, various lines, bearing basic.
2. Thermal
It would comprise of 30% questions. Thermo and HMT basic questions should be the priority.
In FM and FMC focus should be on viscosity, Bernoulli, Flow losses etc. In FMC, specific speed, discharge and classification are most important.
3. Production, Industrial, and MS
It would comprise of 30% questions.
The focus should be on casting, machining, sequencing, and BEP.
4. Rest
It comprises of safety, FMS, CNC, Robotics everything.
It comprises of 10% questions.
Just read the basics.
All the best. If you need anything else just comment below.
1. Design
It comprises of around 30% of questions.
In SOM mostly questions will be from Beam, stress basics, spring.
In TOM DOF, Gears and flywheel. If you have not studied gyroscope, balancing, governor than don't study at last moments, leave them.
In MD failure equations, various lines, bearing basic.
2. Thermal
It would comprise of 30% questions. Thermo and HMT basic questions should be the priority.
In FM and FMC focus should be on viscosity, Bernoulli, Flow losses etc. In FMC, specific speed, discharge and classification are most important.
3. Production, Industrial, and MS
It would comprise of 30% questions.
The focus should be on casting, machining, sequencing, and BEP.
4. Rest
It comprises of safety, FMS, CNC, Robotics everything.
It comprises of 10% questions.
Just read the basics.
All the best. If you need anything else just comment below.
Comments
Post a Comment